Removal

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: DOWNHILL ASSIST CONTROL SWITCH: REMOVAL

1. REMOVE INSTRUMENT PANEL FINISH PANEL END LH Removal

2. REMOVE INSTRUMENT PANEL FINISH PANEL END RH Removal

3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY Removal

4. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY Removal

5. REMOVE COMBINATION SWITCH ASSEMBLY (DOWNHILL ASSIST CONTROL SWITCH)

(a) Remove the 4 screws and combination switch (downhill assist control switch) from the upper console panel.