Installation

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: DOWNHILL ASSIST CONTROL SWITCH: INSTALLATION

1. INSTALL COMBINATION SWITCH ASSEMBLY (DOWNHILL ASSIST CONTROL SWITCH)

(a) Install the combination switch (downhill assist control switch) with the 4 screws.

2. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY Installation

3. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY Installation

4. INSTALL INSTRUMENT PANEL FINISH PANEL END LH Installation

5. INSTALL INSTRUMENT PANEL FINISH PANEL END RH Installation

6. PERFORM DOWNHILL ASSIST CONTROL CALIBRATION

(a) Perform downhill assist control calibration Programming and Relearning.