Power Seat Switch (for Rear LH)

SEAT: POWER SEAT SWITCH (for Rear LH): INSPECTION

1. INSPECT NO. 2 FOLD SEAT SWITCH ASSEMBLY (for Rear LH)

(a) Measure the resistance according to the value(s) in the table below.





Standard Resistance:





If the result is not as specified, replace the No. 2 fold seat switch assembly.

Text in Illustration





(b) Apply battery voltage to the switch connector and check that the fold seat switch illuminates.





OK:





If the result is not as specified, replace the No. 2 fold seat switch assembly.

Text in Illustration