Removal

THEFT DETERRENT / KEYLESS ENTRY: ENGINE HOOD COURTESY SWITCH: REMOVAL

1. REMOVE ENGINE ROOM SIDE COVER LH Removal

2. REMOVE UPPER RADIATOR SUPPORT SEAL Removal

3. REMOVE RADIATOR GRILLE Removal

4. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Dynamic Radar Cruise Control System) Removal

5. REMOVE HOOD LOCK RELEASE LEVER PROTECTOR

(a) Detach the 2 clamps and 2 guides and remove the hood lock release lever protector.

6. REMOVE LOW PITCHED HORN ASSEMBLY Removal

7. REMOVE HIGH PITCHED HORN ASSEMBLY Removal

8. REMOVE HOOD LOCK CONTROL CABLE COVER

(a) Remove the 2 bolts.

(b) Detach the claw and remove the hood lock control cable cover.

9. REMOVE HOOD LOCK ASSEMBLY

(a) Remove the 3 bolts.

(b) Disconnect the connector.