Removal

SUPPLEMENTAL RESTRAINT SYSTEMS: OCCUPANT CLASSIFICATION ECU: REMOVAL

1. PRECAUTION

CAUTION:
Be sure to read Precaution thoroughly before servicing Diagnosis System.

NOTICE:
* When removing the front seat assembly RH, perform zero point calibration and the sensitivity check Diagnosis System.
* When replacing the occupant classification ECU, perform zero point calibration and the sensitivity check Diagnosis System.

2. REMOVE FRONT SEAT ASSEMBLY RH

HINT
Refer to the procedures up to Remove Front Seat Assembly Removal.

3. REMOVE OCCUPANT CLASSIFICATION ECU

(a) Disconnect the 2 connectors.





(b) Using a screwdriver, detach the claw and remove the occupant classification ECU.

HINT
Tape the screwdriver tip before use.

Text in Illustration