Installation

SUPPLEMENTAL RESTRAINT SYSTEMS: CURTAIN SHIELD AIRBAG CUTOFF SWITCH: INSTALLATION

1. INSTALL CURTAIN AIRBAG CUTOFF SWITCH

(a) Attach the 2 claws to install the switch.

2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY Installation

3. INSTALL NO. 1 INSTRUMENT PANEL FINISH CUSHION Installation

4. INSTALL INSTRUMENT PANEL FINISH PANEL END LH Installation

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

6. CHECK SRS WARNING LIGHT

(a) Check the SRS warning light Diagnosis System.