Installation

STEERING COLUMN: MULTIPLEX TILT AND TELESCOPIC ECU: INSTALLATION

1. INSTALL MULTIPLEX TILT AND TELESCOPIC ECU

(a) Install the ECU with the bolt.

Torque : 2.8 Nm (28 kgf-cm, 24 in-lbf)

(b) Connect the 2 connectors.

NOTICE:
The connectors on both ends of the wire harness between the telescopic motor and ECU are the same shape. When installing them, connect the connectors of the same color.

(c) Attach the wire harness clamp.

2. INSTALL NO. 1 INSTRUMENT LOWER PANEL AIRBAG ASSEMBLY

(a) Install the instrument lower panel airbag assembly Installation.

3. INSPECT SRS WARNING LIGHT

(a) Inspect the SRS warning light Diagnosis System.