Headlamp Relay: Testing and Inspection

LIGHTING (EXT): RELAY: ON-VEHICLE INSPECTION

1. REMOVE HEADLIGHT RELAY

(a) Remove the headlight relay from the engine room relay box.





2. INSPECT HEADLIGHT RELAY

(a) Measure the resistance according to the value(s) in the table below.





Standard Resistance:





If the result is not as specified, replace the headlight relay.

3. INSTALL HEADLIGHT RELAY

(a) Install the headlight relay to the engine room relay box.

4. REMOVE REAR FOG LIGHT RELAY

(a) Remove the rear fog light relay from the engine room relay box.





5. INSPECT REAR FOG LIGHT RELAY

(a) Measure the resistance according to the value(s) in the table below.





Standard Resistance:





If the result is not as specified, replace the rear fog light relay.

6. INSTALL REAR FOG LIGHT RELAY

(a) Install the rear fog light relay to the engine room relay box.