Installation

1UR-FE FUEL: FUEL PUMP ECU: INSTALLATION

1. INSTALL FUEL PUMP ECU

(a) Install the fuel pump ECU with the 2 bolts.

Torque : 31 Nm (316 kgf-cm, 23 ft-lbf)

NOTICE:
Do not use the fuel pump ECU if it has been subjected to physical shocks, such as being dropped, etc.

(b) Connect the 2 connectors.

2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.