Removal

1UR-FE ENGINE CONTROL: CAMSHAFT POSITION SENSOR: REMOVAL

1. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

2. REMOVE AIR CLEANER CAP AND HOSE Removal

3. REMOVE CAMSHAFT POSITION SENSOR

(a) Disconnect the camshaft position sensor connector.





(b) Remove the bolt and camshaft position sensor.

4. REMOVE VVT SENSOR

(a) Disconnect the 4 VVT sensor connectors.





Text in Illustration





(b) Remove the 4 bolts and 4 VVT sensors.