Installation

1UR-FE ENGINE CONTROL: ACCELERATOR PEDAL: INSTALLATION

1. INSTALL ACCELERATOR PEDAL POSITION SENSOR ASSEMBLY

NOTICE:
* Avoid physical shocks to the accelerator pedal position sensor.
* Do not disassemble the accelerator pedal position sensor.

(a) Install the accelerator pedal position sensor with the 2 nuts.

Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

(b) Connect the accelerator pedal position sensor connector.

2. INSTALL FRONT NO. 1 CONSOLE BOX INSERT Installation