Installation

1UR-FE EMISSION CONTROL: CANISTER: INSTALLATION

1. INSTALL CANISTER ASSEMBLY





Attach the 2 claws and install the canister with the 3 bolts.

Torque : 20 Nm (204 kgf-cm, 15 ft-lbf)





Connect the vent line hose.

Text in Illustration





(1) Push the hose into the port and push the retainer to lock it.

NOTICE:
* Check for damage or foreign objects on the connected part.
* After connecting the vent hose and valve, check that they are securely connected by trying on to pull them apart.

(a) Connect the air inlet line hose.

NOTICE:
* Check for damage or foreign objects on the connected part.
* After connecting the vent hose and valve, check that they are securely connected by trying on to pull them apart.

(b) Connect the purge line hose.

(c) Connect the connector.

2. INSTALL SPARE TIRE