Removal

POWER OUTLETS (INT): INVERTER MAIN SWITCH: REMOVAL

1. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal

2. REMOVE INSTRUMENT PANEL FINISH PANEL END LH Removal

3. REMOVE DOOR SCUFF PLATE ASSEMBLY LH Removal

4. REMOVE COWL SIDE TRIM BOARD LH Removal

5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Removal

6. REMOVE MAIN SWITCH ASSEMBLY

(a) Detach the 2 claws and remove the main switch.