Replacement

AXLE AND DIFFERENTIAL: REAR AXLE HUB BOLT: REPLACEMENT

HINT
* Use the same procedure for the RH and LH sides.
* The procedure listed below is for the LH side.

1. REMOVE REAR WHEEL

2. REMOVE PARKING BRAKE ASSEMBLY

(a) Remove the parking brake assembly Disassembly.

3. REMOVE REAR AXLE HUB BOLT LH

(a) Using SST and a screwdriver or equivalent, hold the screwdriver and remove the hub bolt.

SST : 09650-17011





Text in Illustration





NOTICE:
* Do not deform the oil deflector.
* Make sure to align the notch of SST with the flange of the oil deflector.

4. INSTALL REAR AXLE HUB BOLT LH





(a) Insert a new hub bolt.

(b) Temporarily install a washer and hub nut to the hub bolt as shown in the illustration.

Text in Illustration





NOTICE:
Install a hub nut to prevent damage to the hub bolt.

(c) Using a screwdriver or equivalent, hold the hub and turn the hub nut until the bottom surface of the hub bolt head touches the axle hub.

(d) Remove the hub nut and washer.

NOTICE:
Do not damage the threads of the hub bolt.

5. INSTALL PARKING BRAKE ASSEMBLY

(a) Install the parking brake assembly Reassembly.

6. INSTALL REAR WHEEL

Torque : 112 Nm (1137 kgf-cm, 82 ft-lbf)