Replacement

AXLE AND DIFFERENTIAL: FRONT AXLE HUB BOLT: REPLACEMENT

HINT
* Use the same procedure for the RH and LH sides.
* The procedure listed below is for the LH side.

1. REMOVE FRONT WHEEL

2. REMOVE DISC BRAKE CYLINDER ASSEMBLY LH Removal

3. REMOVE FRONT DISC Removal

4. REMOVE FRONT AXLE HUB BOLT LH





(a) Using SST and a screwdriver or equivalent, hold the screwdriver and remove the front axle hub bolt.

SST : 09611-12010

Text in Illustration





NOTICE:
Do not damage the threads of the hub bolt.

5. INSTALL FRONT AXLE HUB BOLT LH





(a) Insert a new hub bolt.

(b) Temporarily install a washer and hub nut to the hub bolt as shown in the illustration.

Text in Illustration





NOTICE:
Install a hub nut to prevent damage to the hub bolt.

(c) Using a screwdriver or equivalent, hold the hub and turn the hub nut until the bottom surface of the hub bolt head touches the axle hub.

(d) Remove the hub nut and washer.

NOTICE:
Do not damage the threads of the hub bolt.

6. INSTALL FRONT DISC Removal

7. INSTALL DISC BRAKE CYLINDER ASSEMBLY LH Installation

8. INSTALL FRONT WHEEL

Torque : 112 Nm (1137 kgf-cm, 82 ft-lbf)