Removal

LIGHTING (INT): VANITY LIGHT: REMOVAL

HINT
* Use the same procedure for the RH and LH sides.
* The procedure listed below is for the LH side.

1. REMOVE ROOF HEADLINING ASSEMBLY

(a) Remove the roof headlining assembly Removal.

2. REMOVE VANITY LIGHT ASSEMBLY LH





(a) Detach the 2 claws (A) and separate the bulb holder from the vanity light as shown in the illustration.

(b) Detach the claw (B) and remove the vanity light.

Text in Illustration





3. REMOVE VANITY LIGHT BULB

(a) Remove the bulb.