Installation

LIGHTING (EXT): TURN SIGNAL FLASHER ASSEMBLY: INSTALLATION

1. INSTALL TURN SIGNAL FLASHER ASSEMBLY

(a) Install the turn signal flasher with the nut.

(b) Connect the connector.

2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Installation

3. INSTALL INSTRUMENT PANEL FINISH PANEL END LH Installation

4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

5. INSTALL COWL SIDE TRIM BOARD LH Installation

6. INSTALL DOOR SCUFF PLATE ASSEMBLY LH Installation