Installation

PARK ASSIST / MONITORING: CLEARANCE WARNING BUZZER: INSTALLATION

1. INSTALL NO. 1 CLEARANCE WARNING BUZZER

(a) Attach the clamp to install the No. 1 clearance warning buzzer.

(b) Connect the connector.

2. INSTALL DISPLAY AND NAVIGATION MODULE DISPLAY (w/ Navigation System) Installation

3. INSTALL AIR CONDITIONING CONTROL ASSEMBLY (w/o Navigation System) Installation

4. INSTALL RADIO RECEIVER ASSEMBLY

(a) w/o Navigation System:

Install the radio receiver assembly Installation.

(b) w/ Navigation System:

Install the radio receiver assembly Installation.

5. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY Installation

6. INSTALL NO. 1 INSTRUMENT PANEL FINISH CUSHION Installation

7. INSTALL FRONT UPPER CONSOLE PANEL GARNISH Installation

8. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY Installation

9. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY Installation

10. INSTALL INSTRUMENT PANEL FINISH PANEL END LH Installation

11. INSTALL INSTRUMENT PANEL FINISH PANEL END RH Installation

12. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY Installation

13. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL GARNISH Installation

14. INSTALL INSTRUMENT SIDE PANEL RH Installation

15. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.