Installation

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: SKID CONTROL BUZZER: INSTALLATION

1. INSTALL SKID CONTROL BUZZER ASSEMBLY

(a) Connect the connector.

NOTICE:
Securely connect the connector.

(b) Attach the clamp to install the buzzer.

NOTICE:
* Securely insert the clamp into the dash panel.
* If the buzzer is dropped, replace it.

2. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

(a) Install the instrument panel safety pad sub-assembly Installation.

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.