Removal

HEATING / AIR CONDITIONING: AIR CONDITIONING PRESSURE SENSOR: REMOVAL

1. REMOVE UPPER RADIATOR SUPPORT SEAL Removal

2. REMOVE RADIATOR GRILLE

(a) Remove the radiator grille Removal.

3. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM Service and Repair

4. REMOVE NO. 1 PRESSURE SWITCH





(a) Disconnect the connector.

(b) Remove the No. 1 pressure switch.

(c) Remove the O-ring from the No. 1 pressure switch.

NOTICE:
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.

5. REMOVE AIR CONDITIONING PRESSURE SENSOR





(a) Disconnect the connector.

(b) Remove the air conditioning pressure sensor.

(c) Remove the O-ring from the air conditioning pressure sensor.

NOTICE:
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.