Removal

1UR-FE ENGINE MECHANICAL: DRIVE BELT: REMOVAL

1. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

2. REMOVE UPPER RADIATOR SUPPORT SEAL Removal

3. REMOVE FAN AND GENERATOR V BELT

(a) While turning the belt tensioner counterclockwise, align the service hole for the belt tensioner and the belt tensioner fixing position, and then insert a bar with a diameter of 5 mm (0.197 in.) into the service hole to fix the belt tensioner in place.





Text in Illustration





HINT
The pulley bolt for the belt tensioner has a left-hand thread.

(b) Remove the fan and generator V belt.