Brake Warning Light does not Come ON

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: VEHICLE STABILITY CONTROL SYSTEM: Brake Warning Light does not Come ON
- Brake Warning Light does not Come ON

DESCRIPTION

Refer to Brake Warning Light Remains ON Brake Warning Light Remains ON.

WIRING DIAGRAM

Refer to Brake Warning Light Remains ON Brake Warning Light Remains ON.

INSPECTION PROCEDURE

NOTICE:
When replacing the master cylinder solenoid, perform calibration Programming and Relearning.

PROCEDURE

1. CHECK CAN COMMUNICATION LINE ABS Warning Light Remains ON

NG -- GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING) How to Proceed With Troubleshooting
OK -- Continue to next step.

2. READ VALUE USING TECHSTREAM (BRAKE WARNING LIGHT) Brake Warning Light Remains ON

B -- REPLACE MASTER CYLINDER SOLENOID Disassembly

A -- GO TO METER / GAUGE SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING) How to Proceed With Troubleshooting