Removal

MIRROR (INT): INNER REAR VIEW MIRROR: REMOVAL

1. REMOVE INNER REAR VIEW MIRROR STAY HOLDER COVER (w/o Automatic High Beam System)





Detach the 2 claws and slide the inner rear view mirror stay holder cover as shown in the illustration.





Detach the 2 claws and remove the inner rear view mirror stay holder cover.

2. REMOVE INNER REAR VIEW MIRROR ASSEMBLY (w/o Automatic High Beam System)





Disconnect the connector.

(a) Using a T20 "TORX" socket wrench, remove the screw and inner rear view mirror.

3. REMOVE INNER REAR VIEW MIRROR STAY HOLDER COVER (w/ Automatic High Beam System)





Detach the 2 claws and slide the inner rear view mirror stay holder cover as shown in the illustration.





Detach the 2 claws and remove the inner rear view mirror stay holder cover.

4. REMOVE INNER REAR VIEW MIRROR ASSEMBLY (w/ Automatic High Beam System)

NOTICE:
* Do not touch the camera lens (built into the inner rear view mirror assembly) with bare hands.
* Do not allow anything to adhere to the camera lens (built into the inner rear view mirror assembly).
* Do not subject the inner rear view mirror assembly to strong impacts.
* Do not allow any liquids to contact the inner rear view mirror assembly.





Disconnect the connector.

(a) Using a T20 "TORX" socket wrench, remove the screw and inner rear view mirror.