Installation

MIRROR (INT): INNER REAR VIEW MIRROR: INSTALLATION

1. INSTALL INNER REAR VIEW MIRROR ASSEMBLY (w/ Automatic High Beam System)

NOTICE:
* Do not touch the camera lens (built into the inner rear view mirror assembly) with bare hands.
* Do not allow anything to adhere to the camera lens (built into the inner rear view mirror assembly).
* Do not subject the inner rear view mirror assembly to strong impacts.
* Do not allow any liquid to contact the inner rear view mirror assembly.

(a) Using a T20 "TORX" socket wrench, install the inner rear view mirror with the screw.

(b) Connect the connector.

2. INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER (w/ Automatic High Beam System)





Attach the 2 claws to install the inner rear view mirror stay holder cover.

3. INSTALL INNER REAR VIEW MIRROR ASSEMBLY (w/o Automatic High Beam System)





(a) Using a T20 "TORX" socket wrench, install the inner rear view mirror with the screw.

(b) Connect the connector.

4. INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER (w/o Automatic High Beam System)





Attach the 2 claws.





Attach the 2 claws as shown in the illustration to install the inner rear view mirror stay holder cover.