Removal

WINDOW / GLASS: BACK WINDOW STAY: REMOVAL

HINT
* Use the same procedure for the RH and LH sides.
* The procedure listed below is for the LH side.

1. REMOVE BACK WINDOW STAY ASSEMBLY LH

(a) Using a screwdriver, remove the 2 stop rings as shown in the illustration, and then remove the back window stay.





CAUTION:
Remove the back window stay while supporting the back door with one hand.

HINT
Tape the screwdriver tip before use.

Text in Illustration





2. REMOVE BACK DOOR STAY BOLT





(a) Remove the back door stay bolt.