Disassembly

DOOR / HATCH: HOOD: DISASSEMBLY

1. REMOVE HOOD TO RADIATOR SUPPORT SEAL

(a) Using a clip remover, detach the 7 clips and remove the hood to radiator support seal.





2. REMOVE HOOD INSULATOR

(a) Using a clip remover, remove the 11 clips.





(b) Detach the 2 claws and remove the hood insulator.

3. REMOVE WASHER NOZZLE SUB-ASSEMBLY Removal

4. DISCONNECT WASHER HOSE ASSEMBLY

(a) Detach the 4 clamps and disconnect the washer hose assembly.





5. REMOVE HOOD SUPPORT ASSEMBLY LH Removal

6. REMOVE HOOD SUPPORT ASSEMBLY RH

HINT
Use the same procedure described for the LH side.