Installation

POWER OUTLETS (EXT): TOWING SOCKET: INSTALLATION

1. INSTALL NO. 3 WIRE FRAME

(a) Install the No. 3 wire frame with the 2 bolts.

Torque : 8.4 Nm (86 kgf-cm, 74 in-lbf)

(b) Connect the 2 connectors.

2. INSTALL REAR BUMPER BAR REINFORCEMENT LH Installation

3. INSTALL REAR BUMPER COVER Installation

4. INSTALL REAR BUMPER BAR PLATE Installation

5. INSTALL JACK BOX HOLE COVER Installation

6. INSTALL REAR BUMPER PROTECTOR RH Installation

7. INSTALL REAR BUMPER PROTECTOR LH Installation

8. INSTALL REAR QUARTER PANEL MUDGUARD RH Installation

9. INSTALL REAR QUARTER PANEL MUDGUARD LH Installation