Installation

AUDIO / VIDEO: PILLAR SPEAKER: INSTALLATION

HINT
* Use the same procedure for the RH and LH sides.
* The procedure listed below is for the LH side.

1. INSTALL FRONT NO. 3 SPEAKER ASSEMBLY

(a) Attach the clip and claw to install the front No. 3 speaker.

(b) Connect the connector.

2. INSTALL FRONT PILLAR GARNISH LH Installation

3. INSTALL NO. 1 ASSIST GRIP Installation

4. INSTALL FRONT NO. 1 ASSIST GRIP PLUG LH Installation

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

6. CHECK SRS WARNING LIGHT

(a) Check the SRS warning light Diagnosis System.