Removal

CELLULAR COMMUNICATION: TELEPHONE AND GPS ANTENNA: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
* w/ Navigation System:
After the engine switch is turned off, the display and navigation module display (navigation system) records various types of memory and settings. As a result, after turning the engine switch off, be sure to wait for the time specified in the following table before disconnecting the cable from the negative (-) battery terminal.

Waiting Time before Disconnecting Cable from Negative (-) Battery Terminal:

* When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE ROOF HEADLINING ASSEMBLY

(a) Remove the roof headlining assembly Removal.

3. REMOVE TELEPHONE ANTENNA PROTECTOR

(a) Detach the 2 claws and remove the telephone antenna protector.

4. REMOVE TELEPHONE AND GPS ANTENNA (TELEPHONE ANTENNA ASSEMBLY)

(a) Remove the antenna nut.

(b) Disconnect the connector.