Installation

PARK ASSIST / MONITORING: TELEVISION CAMERA (for Side): INSTALLATION

1. INSTALL SIDE TELEVISION CAMERA ASSEMBLY

(a) Install the side television camera with the 3 screws.

(b) Connect the connector.





Attach the claw as shown in the illustration to install the part labeled A to the part labeled B.

NOTICE:
Be careful not to break the claw.

(c) Attach the part labeled C as shown in the illustration.





(d) Install the 5 screws.

(e) Using a T25 "TORX" socket wrench, install the 3 screws.

HINT
* Clean the threads of the screw with non-residue solvent.
* Apply adhesive to the threads of the screw.

Adhesive:

Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent





Attach the 8 claws to install the lower cover.

(f) Attach the 4 claws to install the rubber base.

(g) Install the screw.





Apply 2 new pieces of tape so that they overlap.

Text in Illustration





2. INSTALL SIDE TURN SIGNAL LIGHT ASSEMBLY RH Installation

3. INSTALL OUTER MIRROR COVER RH Reassembly

4. INSTALL OUTER MIRROR RH Reassembly

5. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY RH

(a) Install the outer rear view mirror assembly Installation.