Installation

NAVIGATION / MULTI INFO DISPLAY: NAVIGATION ANTENNA: INSTALLATION

1. INSTALL NAVIGATION ANTENNA ASSEMBLY

(a) Install the navigation antenna with the 2 screws.

(b) Attach the 3 clamps.

2. INSTALL DEFROSTER NOZZLE ASSEMBLY Reassembly

3. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT Reassembly

4. INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT Reassembly

5. INSTALL NO. 2 HEATER TO REGISTER DUCT Reassembly

6. INSTALL NO. 1 HEATER TO REGISTER DUCT Reassembly

7. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

(a) Install the instrument panel safety pad sub-assembly Installation.

8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

9. CHECK SRS WARNING LIGHT

(a) Check the SRS warning light Diagnosis System.