Installation

AUDIO / VIDEO: AMPLIFIER ANTENNA: INSTALLATION

1. INSTALL HOLDER ANTENNA ASSEMBLY (for 5 Door)

(a) Install the holder antenna with the bolt as shown in the part of the illustration labeled A.





Torque : 7.0 Nm (71 kgf-cm, 62 in-lbf)

(b) Attach the clamp and install the holder antenna with the bolt as shown in the part of the illustration labeled B.

Torque : 7.5 Nm (76 kgf-cm, 66 in-lbf)

(c) Connect the 3 connectors.

2. INSTALL ROOF HEADLINING ASSEMBLY

(a) Install the roof headlining assembly Installation.

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. CHECK SRS WARNING LIGHT

(a) Check the SRS warning light Diagnosis System.