LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2011 >> ES 350 >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter & Gauge (Service Information) >> Steering Pad Switch >> Removal >> Removal

Steering Pad Switch: Removal: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    WARNING: Wait for 90 seconds after disconnecting the cable to prevent airbag deployment. Refer to PRECAUTION .
  2. REMOVE LOWER NO. 3 STEERING WHEEL COVER  . Refer to REMOVAL - Step 3
  3. REMOVE LOWER NO. 2 STEERING WHEEL COVER  . Refer to REMOVAL - Step 4
  4. REMOVE STEERING PAD  . Refer to REMOVAL - Step 5
  5. REMOVE STEERING PAD SWITCH ASSEMBLY 
    1. Disconnect the pad switch connector from the spiral cable.
    2. Remove the 2 screws.
      Fig 1: Identifying Steering Pad Switch Screws With Claws
      GTY122245Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Disengage the 4 claws and remove the steering pad switch assembly.
scientia non olet · About LEMON Manuals