DTC P2810: Pressure Control Solenoid "G" Electrical (Shift Solenoid Valve SL4) (TO 08/2009): Description

Changing from 1st to 6th is performed by the TCM turning shift solenoid valves SL1, SL2, SL3, SL4 and SL on and off. If an open or short circuit occurs in any of the shift solenoid valves, the TCM controls the remaining normal shift solenoid valves to allow the vehicle to be operated. Refer to FAIL-SAFE CHART

DTC No.	DTC Detection Condition	Trouble Area
P2810	The TCM checks for an open or short in the shift solenoid valve SL4 circuit while driving and shifting gears. (1-trip detection logic) Output signal duty equals to 100%. (NOTE: SL4 output signal duty is less than 100% under normal condition.)	Open or short in shift solenoid valve SL4 circuit Shift solenoid valve SL4 TCM