Removal (To 08/2009): Removal

REMOVE ENGINE ASSEMBLY WITH TRANSAXLE
HINT:

Refer to the procedure up to Remove Engine Assembly with Transaxle. Refer to REMOVAL - Step 83 .
SEPARATE FRONT STABILIZER LINK ASSEMBLY LH
1. Remove the nut and separate the front stabilizer link assembly LH.
  
  Fig 1: Locating Front Stabilizer Link Assembly Nut LH
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  HINT:
  
  If the ball joint turns together with the nut, use a hexagon wrench (6 mm) to hold the stud bolt.
SEPARATE FRONT STABILIZER LINK ASSEMBLY RH
HINT:

Perform the same procedure as the LH side.
REMOVE NO. 1 FRONT STABILIZER BRACKET LH
1. Remove the 2 bolts and the No. 1 front stabilizer bracket LH from the front frame assembly.
  
  Fig 2: Locating Front No. 1 Stabilizer Bracket RH (For AWD)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE NO. 1 FRONT STABILIZER BRACKET RH
HINT:

Perform the same procedure as the LH side.
REMOVE FRONT STABILIZER BAR
REMOVE NO. 2 FRONT STABILIZER BRACKET LH
1. Remove the No. 2 front stabilizer bracket LH from the front stabilizer bar bushing.
  
  Fig 3: Identifying No. 2 Front Stabilizer Bracket
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE NO. 2 FRONT STABILIZER BRACKET RH
HINT:

Perform the same procedure as the LH side.
REMOVE NO. 1 FRONT STABILIZER BAR BUSHING
1. Remove the 2 No. 1 front stabilizer bar bushings from the front stabilizer bar.