REMOVAL (To 8/2009): Removal
- PRECAUTION (w/ Navigation System for HDD) NOTE:
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Refer to INITIALIZATION .
- REMOVE HEIGHT CONTROL SWITCH
- Disengage the 2 claws to remove the height control switch from the deck trim side panel assembly RH.
- Disconnect the connector.