REMOVAL (To 8/2009): Removal

1. Remove the air cleaner assembly. Refer to REMOVAL .

HINT: 

Refer to PRECAUTION .

1. Disconnect the union to connector tube hose.
   Fig 1: Disconnect the union

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Disconnect the throttle body assembly connector and wire harness clamp.
   Fig 2: Locating Throttle Body Assembly Connector And Wire Harness Clamp

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Disconnect the vacuum hose clamp and fuel vapor feed hose.
   Fig 3: Disconnect the vacuum hose clamp and fuel vapor feed hose

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Disconnect the 2 water by-pass hoses.
   Fig 4: Locating Water By-Pass Hoses

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Disconnect the ventilation hose and vacuum hose.
   Fig 5: Disconnect the ventilation hose and vacuum hose

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
6. Disconnect the connector from the intake air control valve assembly.
   Fig 6: Locating Connector

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
7. Remove the bolt and separate the No. 1 surge tank stay from the intake air surge tank assembly.
   Fig 7: Remove the bolt and separate the No. 1 surge tank stay

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
8. Remove the bolt and separate the throttle body bracket from the intake air surge tank assembly.
9. Remove the 2 nuts from the intake air surge tank assembly.
   Fig 8: Remove the 2 nuts

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
10. Using a 5 mm socket hexagon wrench, remove the 4 bolts.
11. Remove the intake air surge tank assembly and 3 air surge tank to intake manifold gaskets.

1. Remove the 6 bolts, 4 nuts, intake manifold and 2 intake manifold to head gaskets.
   Fig 9: Locating Intake Manifold Bolt And Nuts

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002