LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2010 >> RX 350 FWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes (Hydraulic) (Service Information) >> Brake Pedal >> Disassembly >> Disassembly

Brake Pedal: Disassembly: Disassembly

  1. REMOVE BRAKE PEDAL PAD 
    1. Remove the brake pedal pad from the brake pedal sub-assembly.
  2. REMOVE BRAKE PEDAL SUB-ASSEMBLY (for TMC Made) 
    1. Disengage the 2 clamps.
      Fig 1: Disengage the 2 clamps
      GTY257196Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt, nut and brake pedal sub-assembly from the brake pedal support sub-assembly.
      Fig 2: Remove The Bolt, Nut And Brake Pedal Sub-Assembly
      GTY284135Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE BRAKE PEDAL SHAFT COLLAR (for TMC Made) 
    1. Remove the brake pedal shaft collar from the brake pedal sub-assembly.
  4. REMOVE BRAKE PEDAL BUSHING (for TMC Made) 
    1. Remove the 2 brake pedal bushings from the brake pedal sub-assembly.
  5. REMOVE STOP LIGHT SWITCH CUSHION (for TMC Made) 
    1. Remove the stop light switch cushion from the brake pedal sub-assembly.
scientia non olet · About LEMON Manuals