CD Sound Skips (TO 08/2009): Procedure

1. Check that the CD is not deformed or cracked.
   Fig 1: Checking Disc For Deformed Or Cracked

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   OK

   No deformation or cracks on the CD

NG → CHANGE DISC 

OK: Go to next step 

1. Check the CD.
   Fig 2: Cleaning Disc Surface With Soft Dry Cloth

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   OK

   The CD is clean.

   HINT: 

   If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

   NOTE:

   Do not use a conventional record cleaner or anti-static preservative.

NG → CLEAN CD 

OK: Go to next step 

1. Check if the problem recurs using a known good CD.

   OK

   Malfunction disappears.

NG → See step   4 

OK → END 

1. Check the radio receiver assembly installation condition.
   1. Check that the radio receiver assembly is properly installed.

      OK

      Radio receiver assembly is properly installed.

NG → REINSTALL RADIO RECEIVER ASSEMBLY PROPERLY 

OK → See step   5