REMOVAL (To 8/2009): Removal

REMOVE CONSOLE REAR END PANEL SUB-ASSEMBLY . Refer to REMOVAL - Step 4
REMOVE MULTI-MEDIA INTERFACE ECU ASSEMBLY
1. Remove the 2 bolts.
  
  Fig 1: Locating 2 Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Disengage the clip and guide.
3. Disconnect the connector and remove the multi-media interface ECU assembly.
REMOVE NO. 1 MULTI-MEDIA INTERFACE BRACKET (for TMC Made)
1. Remove the 2 bolts and No. 1 multi-media interface bracket.
  
  Fig 2: Remove The 2 Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE NO. 2 MULTI-MEDIA INTERFACE BRACKET (for TMC Made)
1. Remove the bolt and No. 2 multi-media interface bracket.
  
  Fig 3: Remove The Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE MULTI-MEDIA INTERFACE ECU (for TMC Made)