DTC B2450: Initialization has not been Performed (From 08/2009): Procedure

1. Perform initialization of the AFS ECU (headlight swivel ECU assembly). Refer to INITIALIZATION .

NEXT: Go to next step 

1. Using the Techstream, recheck for DTCs.

   Result

   Result	Proceed to
   B2450 is not output.	A
   B2450 is output.	B

   HINT: 

   If the AFS ECU (headlight swivel ECU assembly) stores B2450 even though the ECU has been initialized, there may be a malfunction in the AFS ECU (headlight swivel ECU assembly).

B → See step   3 

A → END