DTC P0A08-101: DC / DC Converter Status Circuit: Procedure

1. Connect the Techstream to the DLC3.
2. Turn the power switch on (IG).
3. Select the following menu items: Powertrain / Hybrid Control / Trouble Codes.
4. Check if DTCs are output.

   Result

   Result	Proceed to
   P0A08-101 only is output.	A
   P3085-188 is also output.	B

B → See step   4 

A: Go to next step 

1. Replace the hybrid vehicle converter. Refer to COMPONENTS .

NEXT: Go to next step 

1. Turn the power switch on (READY).
2. Leave the vehicle for 5 minutes. (The auxiliary battery will be charged.)
3. Turn the vehicle off.
4. Measure the voltage of the auxiliary battery.

   Standard voltage

   Tester Connection	Switch Condition	Specified Condition
   Auxiliary battery positive terminal (+) - Auxiliary battery negative terminal (-)	Power switch on (READY)	11 to 14 V

   HINT: 

   The auxiliary battery may have discharged and deteriorated due to a malfunction in the hybrid vehicle converter. Therefore, inspect the auxiliary battery and replace it if it has deteriorated.

NG → REPLACE AUXILIARY BATTERY 

OK → END