DTC P0732-867: Gear 2 Incorrect Ratio; DTC P0732-868: Gear 2 Incorrect Ratio: Description
For a description of the hybrid vehicle transmission assembly. Refer to DESCRIPTION .
HINT:
Although the DTC title indicates an incorrect gear ratio, this DTC relates to a malfunction of the B1 hydraulic circuit.
| DTC No. | INF Code | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| P0732 | 867 | Even if the fluid pressure was applied for high gear after the ST-on state occurred, the hybrid vehicle control ECU is not able to confirm that the fluid pressure was applied to the B1 circuit within the specified time. |
|
| P0732 | 868 | When upshifting: After shifting completed, the hybrid vehicle control ECU is not able to confirm that the fluid pressure was applied to the B1 circuit within the specified time. |
HINT:
ST-on is a state that occurs when the READY indicator in the combination meter blinks after the power switch is pressed with the brake pedal depressed.