Inspection Procedure

HINT: 

• Read the freeze frame data using the Techstream. In the freeze frame data, some information is recorded about the engine conditions at the moment a malfunction occurred. This information can be helpful when troubleshooting.
• Characteristics of the thermistor resistance (reference values) are as follows.

  Terminal	THB (with connector disconnected)	Resistance	Ambient Temperature
  THB - E2	4.5 to 5.5 V	5.0 to 5.3 kΩ	Approximately 32°F (0°C)
  		2.3 to 2.5 kΩ	Approximately 68°F (20°C)
  		1.1 to 1.3 kΩ	Approximately 104°F (40°C)