LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2010 >> IS 350 >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Automatic Transmission (A760H) (Diagnostic Codes (P0500-U0100) & Circuit Tests)) >> Automatic Transmission System >> DTC U0100: Lost Communication with ECM / PCM "A" >> Inspection Procedure >> Procedure

Inspection Procedure: Procedure

WARNING: This page is about a different car, the 2010 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK OTHER DTC OUTPUT (IN ADDITION TO DTC U0100) 
    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG) position and push the Techstream main switch ON.
    3. When you use Techstream:

      Select the item "Powertrain / ECT / Trouble Codes".

    4. Read the DTCs using the Techstream.

      Result

      Display (DTC output) Proceed to
      U0100 A
      U0100 and other DTCs B

    B → GO TO DTC CHART 

    A → REPLACE ECM 

scientia non olet · About LEMON Manuals