Typical Malfunction Thresholds
WARNING: This page is about a different car, the 2010 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
Both of the following condition are met: OFF malfunction (A) and (B)
OFF MALFUNCTION (A):
| Engine speed - Turbine speed (NE - NT) | 70 rpm or more |
OFF MALFUNCTION (B):
| Turbine speed/Output speed (NT/NO) | Less than 3.40, or more than 7.50 |
2 detections are necessary per driving cycle:
1st detection; temporary flag ON
2nd detection; pending fault code ON
Vehicle speed must be under 6.2mph (10 km/h) once before 2nd detection.
ON MALFUNCTION:
| Engine speed - Turbine speed (NE - NT) | Less than 35 rpm |