Typical Enabling Conditions
WARNING: This page is about a different car, the 2010 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
| The monitor will run whenever this DTC is not present. |
P0115 - P0118 (ECT sensor)
P0125 (Insufficient ECT for Closed Loop)
P0500 (VSS)
P0748 - P0798 (Trans solenoid (range)) |
| Solenoid current cut status |
Not cut |
| CPU commanded duty |
19% or more |
| Battery voltage |
11 V or more |
| Engine Switch |
ON |
| Starter |
OFF |