Typical Enabling Conditions
WARNING: This page is about a different car, the 2010 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
| The monitor will run whenever this DTC is not present. (Not circuit malfunction) |
P0748 (Shift solenoid valve SL1 circuit) P0751, P0973, P0974 (Shift solenoid valve S1 circuit) P0756, P0976, P0977 (Shift solenoid valve S2 circuit) P0761, P0979, P0980 (Shift solenoid valve S3 circuit) P0766, P0982, P0983 (Shift solenoid valve S4 circuit) P0776, P0778 (Shift solenoid valve SL2 circuit) P0985, P0986 (Shift solenoid valve SR circuit) |
| Shift change | Shift change is completed and before starting next shift change operation |
| ECM selected gear | 4th, 5th or 6th |
| Output shaft rpm | 1,000 rpm or more |
| R switch | OFF |
| Engine | Running |
| Battery voltage | 8 V or more |
| Engine switch | ON |
| Starter | OFF |