LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2010 >> IS 250C Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes (Hydraulic) (Service Information) >> Brake Fluid >> On-Vehicle Inspection >> On-Vehicle Inspection

On-Vehicle Inspection

  1. INSPECT FLUID LEVEL IN RESERVOIR 
    1. Check the fluid level.

      If the brake fluid level is lower than the MIN line, check for leaks and inspect the disc brake pads. If necessary, refill the reservoir with brake fluid after repair or replacement.

      Fig 1: Inspecting Fluid Level In Reservoir
      GTY135284Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Brake Fluid

      SAE J1703 or FMVSS No. 116 DOT3