LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2010 >> IS 250 RWD, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter (Service Information) >> Steering Pad Switch >> Installation >> Installation

Steering Pad Switch: Installation: Installation

  1. INSTALL STEERING PAD SWITCH ASSEMBLY 
    1. Engage the 4 pins.
      Fig 1: Identifying Screws & Steering Pad Switch
      GTY151045Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the steering pad switch assembly with the 2 screws.
    3. Connect the 2 connectors and engage the clamp.
      Fig 2: Identifying Connectors
      GTY130886Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL STEERING PAD  . Refer to INSTALLATION - Step 1
  3. INSTALL NO. 3 LOWER STEERING WHEEL COVER  . Refer to INSTALLATION - Step 2
  4. INSTALL NO. 2 LOWER STEERING WHEEL COVER  . Refer to INSTALLATION - Step 3
  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  6. INSPECT STEERING PAD  . Refer to INSTALLATION - Step 5
  7. INSPECT SRS WARNING LIGHT 
scientia non olet · About LEMON Manuals